 |
Tray Bird Feeder
- Total Time Needed:
- Afternoon Or Evening
One of the first signs of spring is the sight and song of birds returning from warmer climates where they've wintered. A great way to welcome them back is to hang a tray feeder (a style many types of birds will eat from) filled with a mix of black oil sunflower seeds and millet.
- Materials
-
- 1- by 3-inch (actual measurement is 3/4 by 2 1/2 inches) pine board, 4 feet long
- Drill with 5/64- and 1/4-inch bits
- Hammer
- 5d galvanized box nails
- 10-inch square of aluminum screening (sold in most hardware stores)
- Copper upholstery tacks
- Pair of rawhide laces, each 36 inches long
- Instructions
-
-
Cut the pine board into two 10 1/2-inch lengths and two 9-inch lengths. -
Stand the shorter pieces on end and set one of the longer pieces on top of them (like a table), so that the ends are flush, as shown. -
Use the 5/64-inch bit to predrill holes, then nail the pieces together.
-
Flip over the assembly and nail the other long piece in place (again predrilling the holes) to form a square frame.
-
Tack the screen to the bottom edges of the frame, as shown, Finally, use the 1/4-inch bit to drill a pair of holes in 2 opposite sides. -
Thread a lace through the holes in each side, knot the ends, and the feeder is ready to hang.
-
- Find more about:
 |
from Disney family Community
Related Groups
-
- Homemade Holidays
- Join us as we share ideas for adding the homemade touch to every holiday!
-
- Crafting With Kids
- Get great ideas for fun and cute crafts to make with your kids.
|